Available only from Stromberg Speed Parts. A brand new genuine Stromberg 97 with 250cfm max airflow, significantly improved fuel circuits and ported vacuum for your aftermarket distributor. This model features a different throttle shaft bracket, set up for linkages that push instead of the usual pull from the firewall - like some Mercury and Lincoln Zephyr models (please check before ordering).
The BIG97 Primary can be used on its own, in multiples (with direct or progressive linkage) or as part of the BIG97 Tri-Power. Everything that makes the Genuine Stromberg 97 so popular is built into the all-new BIG97. And so much more. Here are some highlights:
- 55% more airflow – a 1.175in venturi with improve venturi entry and exit shapes for 250cfm per carburetor.
- Located in the fuel bowl, the new power valve circuit feeds directly into the emulsion tubes, significantly improving fuel conditioning at higher rpm.
- New ‘early plenum effect’ base casting allows all cylinders to draw from both barrels for more top end power. It’s like dual-plane drivability with a single-plane top end.
- Ported distributor vacuum improves combustion efficiency at cruise. You’ll run smoother and cooler, with more torque and better fuel mileage.
- BIG S-jet twin-ball inlet valves take big 5/16in hard line and the full range of Stromberg fuel fittings.
- Super-efficient 20 degree entry angles encouraging maximum pressure drop into the venturi, with minimum flow loss and excellent signal stability.
- Bigger, thinner 1.34in throttle plates work within offset throttle bores, while flared exit cones ensure good pressure recovery and low turbulence.
- BIG97 accelerator pump discharge jets (Primary carburetors only) are smaller and located higher up, well out of the booster airflow.
- BIG97s come ready to run with 0.056in main jets, #65 power valve and a #60 accelerator pump valve. A wide range of jets and power valves is available separately.
- Black & Chrome and Barn Find finishes, plus cable-choke options available to special order.
Remember, like any carburetor, BIG97s need correct installation and tuning for optimum performance. Every BIG97 comes with full installation guide and help with tuning at our Tech Center.
NOTE: Legal only for off-road use or for use on pre-emission controlled motor vehicles/engines. In the USA, this means pre-1966 domestic vehicles certified to California standards, pre-1968 domestic vehicles certified to federal standards and all pre-1968 foreign vehicles. Original hand throttle parts are not included.
