A premium 3×2 progressive carburetor linkage designed for optimum performance and versatility. Use on intakes with 4-7/8in carb spacing. If in doubt, simply measure your manifold spacing – throttle shaft to throttle shaft. Exclusive to Stromberg Speed Parts - this linkage features our ‘Snapback’ throttle return springs, which virtually disappear from view. Special swivels and bolts clamp the rod ends tight, yet still allow full rotation. The small bolt has a blind hole, allowing you to insert eg, a hex key, to tighten the lock nut.
The tapered rod stops are fully adjustable, with discreet set screw fixings and opposite threaded rod ends ensuring easy adjustment. Just spin the secondary link rod to adjust for the correct lever angles.
The linkage comes pre-assembled, installs in just two simple steps and comes with full instructions. Click the other tabs for help with installation and tuning.
WARNING! To use this linkage with banjo fuel fittings, you must add our 9086K banjo fitting spacers to ensure safe clearance between the long lever and the fuel line. Always read the instructions before installation.
