A quality 2×2 progressive carburetor linkage designed for optimum performance and versatility. Use on intakes with 5in to 5-3/16in carb spacing (easily adjusts for both). If in doubt, simply measure your manifold spacing – throttle shaft to throttle shaft.
Exclusive to Stromberg Speed Parts - this linkage features our ‘Snapback’ throttle return springs, which virtually disappear from view. The tapered rod stops are fully adjustable, with discreet set screw fixings.
The linkage comes pre-assembled, installs in just two simple steps and comes with full instructions. Click the other tabs for help with installation and tuning.
Four-banger specialist Charlie Yapp (Secrets of Speed magazine) tells us, “Ford Model A and B type engines are mounted in the frame at 4 degrees tilt to the rear so the manifolds have a 4 degree angled mount to keep the carburetors level.
The “Equalizer” and “Riley Two Port” dual intake manifolds feature a mixing plenum so you can set them up with two functioning carbs linked directly or with a progressive linkage. It will also work well on the street, with one dummy carb at the rear and the functioning carb forward.
WARNING! To use this linkage with banjo fuel fittings, you must add our 9086K-P banjo fitting spacers to ensure safe clearance between the long lever and the fuel line. Always read the instructions before installation.
