The Stromberg Cable Throttle Bracket is compatible with pretty much all Stromberg 97-based intake manifolds, though some Ford Flathead intakes need a remote fuel pump for clearance. It’s easy to install, of course, especially if you download our ‘How To: Install 9136K Cable Throttle Bracket’ instructions in the Tech Center tab. Just remember to mount it under the rear carburetor on your intake. On a 3×2 direct linkage, the bracket lifts the rear carburetor a little, so the front two carbs may need packing with extra gaskets (see our kit 69447K) for perfect linkage alignment.
On a 2×2 direct or 3×2 progressive linkage, this is not a problem.
To attach a throttle cable to your Stromberg linkage, add a 9166K Rocket Clip to the end of the cable and clip it onto a 9168K throttle ball which you can mount either into the swivel or (on the longer progressive lever) through the lower adjustment hole. On a 2×2 linkage, fix the cable to the front carburetor. On a 3×2 system, fix it to the center carb. Always check that the threaded ball clamps the linkage rod tight.
